PRE-ORDER: Single Digit House Sign

**House Signs are completely personalised to your preferences. Please take the time to read all the information available here and go through each of the options available to build your perfect House Sign. Should you require any further information, please do Get in Touch**

You can use the "Notes" box above to tell us anything important you think will help in the design of your House Sign. Ie. placement, what angle it will be viewed from, etc.

Single digit signs measure approximately 15cm tall by 12cm wide.

The measurements above do not include the number or cutlery add-on, it is the measurements for the backing plate only and is given as a rough guide, not an exact measurement.

House Signs DO NOT come with any hardware for attaching to the wall. This is solely the responsibility of the customer. You MUST buy stainless steel screws (5mm countersunk) to prevent rusting and you must buy the correct type of screws for attaching your sign to the wall safely and securely. Any damage caused to the sign or property or any rust produced by installing the incorrect screws lies solely with the customer and No Forks Given Fabrications are NOT responsible for this in any way.

Your sign will come finished with UV/weatherproof lacquer front and back. This should last years. If you feel it may need re-doing at any point, please drop us an email to discuss the cost of this service. Should you cause any damage to your sign and, subsequently, the lacquer, you will need to cover the costs to send back to us and have it recoated. If you choose not to do this and your sign rusts, this is not the responsibility of No Forks Given Fabrications and we will not replace your sign. Repair may be provided at a cost, to be discussed in advance but this is solely at the discretion of No Forks Given Fabrications depending on the damage caused.

Stainless steel plate and round bar are used for the backing plate and number, stainless steel recycled cutlery is used for any of the add-on designs. The backing plate has our heat-painted finish with the number being polished so it stands out against the backing plate. Add-on designs vary and can be seen using the drop-down menu above.

Please do expect some small marks and imperfections given the handmade nature of this product and the materials we use. We are an upcycling business and do like to leave signs of previous life in the materials we use. House Signs are made entirely by hand to order.

Theft of the House Sign from your property is NOT the responsibility of No Forks Given Fabrications. Please ensure they are securely screwed to the wall and in sight of doorbell and/or CCTV cameras to help eliminate this problem.

House Signs are heavy and ornamental and must be kept out of reach of children, pets and vulnerable people at all times. They are not to be used as a toy. Please do NOT allow anyone to hang from, fiddle with or apply weight to your House Sign, this may result in serious injury or damage to the sign/wall.

Photos are of previous designs and are for illustrative purposes only. Some of our cutlery designs have changed since these photos were taken so you may receive something that looks different to the photos provided. Please check out the gallery for up to date photos of our cutlery designs.

Design and Copyright belongs to No Forks Given Fabrications(TM); 2022 to present day. We do not give permission to copy or steal any of the physical designs, photographs or information found on this website or across any of our social channels. Doing so would be a direct violation of the law and we will take action against any individual or collective found to be stealing our original works.

Should you require any further information, our full policies and terms and conditions can be seen here: https://www.noforksgivenfabrications.co.uk/gdpr-and-returnsrefund-policies.html